Water Damage Restoration in Hurst, TX
24/7 water damage restoration in Hurst, TX, where one-story brick ranch homes sit on slabs over expansive clay. The drying team extracts standing water, dries each room to the IICRC S500 standard and logs every reading.
(888) 527-9134Carpet soaking up water? Get the drying started
Water Damage Restoration Services in Hurst, TX
Water and sewage only, from the first pump-out to the final moisture reading. Hurst's slab homes and rental units let water travel across a single floor quickly, so extraction and carpet drying lead the list.
One-story ranch layoutsWater ExtractionPump-out that begins at carpet, pad and baseboards before water crosses a one-story floor plan.See the service 
Aging clay-soil slabsSlab Leak Water DamageLeaks under older slabs that clay movement stressed, traced with meters and dried in place.See the service 
Burst Pipe Water DamagePipes split on the few hard freeze nights Hurst gets each year, then extracted and dried.See the service 
Ceiling Leak Water DamageStains from the roof, the attic or the HVAC, with the source traced before any drying.See the service 
Roof Leak Water DamageHail risk peaks from March through June, and damaged shingles or flashing let rain into the attic.See the service 
Storm and Flood CleanupStreet and yard flooding across six watersheds, including Walker Branch and Valley View Branch.See the service 
Water Heater Leak CleanupTank failures that run onto the slab and into carpet, or through shared walls in rentals.See the service 
Appliance Leak Water DamageWasher and dishwasher leaks in houses and 1970s apartment complexes, dried before neighbors feel them.See the service 
Toilet Overflow CleanupOverflows that reach carpet and baseboards at slab level, sorted by water category first.See the service 
Sewage Backup CleanupCategory 3 backups: containment, then removal of porous materials, wherever the blockage sits.See the service 
Hardwood Floor Water DamageBoards laid over concrete, checked for cupping with moisture readings before any decision.See the service 
Structural DryingBrick veneer over wood frame can hold water in wall cavities, so cavity and subfloor readings come first.See the service 
Commercial Water DamageRetail around North East Mall, offices and hotels along SH 121/183 and I-820, plus campuses.See the service 
Carpet Water DamageCarpet and pad that wick water toward the slab edge, dried in place or pulled by category.See the service Hurst water loss: what to do in the first hour
Water on a slab spreads in every direction, so the early minutes count. These five steps keep a Hurst loss small until the extraction crew gets to work.
Find the shutoff
Close the main valve at the meter or house, or only the fixture valve for a local leak, so water stops reaching the floor.
Cut power safely
Flip breakers for soaked rooms only while standing on dry ground at a dry panel. Leave them alone if water is near the box.
Mind the outlets
Standing water near plugs, cords or appliances can carry current, so keep family and pets out of soaked rooms.
Photograph the loss
Take wide and close photos of each wet room and the source before anything moves, so the claim starts with proof.
Clear the floor, then call
Get rugs, boxes and cushions off wet carpet, then call so the pad and baseboards still have a chance.
Slab homes pass water straight into carpet and baseboards, so the first day of drying saves more than any later day.
How a water loss is handled in a Hurst home
Moisture mapping
A tech walks every wet room with pinless meters and a thermal camera, tracking water that crossed a ranch floor plan and slipped under baseboards, cabinets and interior walls.
Extraction
Truck-mounted extraction pulls pooled water out of the house, then weighted tools press out what remains in carpet and pad so it cannot creep into dry rooms.
Fans and dehumidifiers
Air movers sized to each room push moisture off surfaces while LGR dehumidifiers pull it from the air, and brick-veneer wall cavities get checked.
Daily readings
Meters go back on floors, subfloor and wall bottoms every day, and the equipment stays until each reading matches a dry reference.
The drying goal
Equipment comes out when meters show wet materials within 2 to 4 points of the same materials in a dry room, never because a date passed.
Drying timeline for a Hurst home
Carpet and drywall in a clean-water loss reach the goal first. Slabs, plaster and wood floors over concrete hold water longer, so they set the pace for the whole job.
Water mapped and extracted, baseboards pulled where water ran behind them, drying equipment started.
Meter numbers fall, and fans move as the wet zones shrink.
Carpet and drywall in clean-water losses are usually first to match the dry reference.
Dense slabs, wood floors and long-wet cavities, often helped by mats or desiccant units.
Three water categories, and how Hurst homes meet them
Category 1, clean water
Broken supply pipes, tank failures and ice-maker leaks. Caught fast, carpet and drywall can often dry where they sit.
Category 2, gray water
Washer or dishwasher discharge and toilet bowl overflow without solids. Pad and porous trim are usually cleaned or replaced.
Category 3, black water
Sewage and flooding from the street or yard. Porous materials come out before antimicrobial treatment and drying.
What does water damage restoration cost in Hurst, TX?
Pricing in Hurst follows the North Richland Hills cost ranges and moves with four things: the water category, the square footage reached, the material class and how quickly drying began.
One room, clean water
- Pump-out and moisture map
- Carpet dried where it lies
- Readings until dry
Several rooms or a slab leak
- Pad and baseboards pulled
- Slab and wall-bottom drying
- Daily numbers for the claim
Category 3 or a large loss
- Porous materials removed
- Containment, air scrubbers
- Extended structural drying
Typical ranges, not a quote. To size up your own rooms, try the water damage cost calculator first.
Insurance: what goes in the claim file
Adjusters decide on documentation. About 40% of Hurst households rent, so one loss can involve an owner's policy for the building and a tenant's policy for belongings.
- A moisture map from the first day showing where water traveled.
- Temperature, humidity and material readings logged daily until dry.
- Timestamped photos taken before flooring or drywall comes out.
- The loss category and class, plus a scope with itemized work an adjuster can follow.
Sudden and accidental water, such as a split supply pipe, is treated differently from rising stream or street water, which falls under flood coverage. Policies vary a great deal, so it is worth checking with your own insurer.
What a water damage dry-out looks like in a Hurst home
Hurst water damage pros, answering day and night
Whatever the hour, the closest extraction crew heads out with pumps, meters and drying gear, whether the job is a ranch house in ZIP 76053 or 76054, a rental near the mall corridor or a shop in 76180.
(888) 527-9134Send a drying crew to HurstWater damage in Hurst, TX: the local risk profile
Hurst incorporated in September 1952 after Bell Aircraft announced its plant, then nearly tripled from 10,165 residents in 1960 to 27,215 in 1970. About 40% of homes date to the 1950s and 1960s, so slabs are now 45 to 70 years old.
Aging slabs on clay
Expansive clay swells when wet and shrinks when dry, and that movement can break plumbing under or near the slab.
Spring hail leaks
Hurst sits in the North Texas hail corridor, and peak hail risk runs from March through June.
Stream and street flooding
Six major watersheds, including Walker Branch and Valley View Branch, bring stream flooding and localized flooding.
Rental and apartment leaks
About 40% of households rent and 1970s apartment complexes are common, so one leak can reach neighbors.
Areas served
Hurst itself, including the Bellaire Park, Heatherwood Estates and Prestonwood Estates neighborhoods, the townhome communities and the blocks around Mid-Cities Boulevard and SH 10, plus these neighbors:
ZIP codes:
Hurst water damage questions, answered
Does a restoration crew work nights and weekends in Hurst?
The restoration team works around the clock, and active water is treated as urgent at any hour. On a slab, every hour lets water wick a little farther into carpet pad, baseboards and the bottom of drywall.
Which leaks hit Hurst houses most often?
Aging plumbing on shifting clay, hard freeze splits, hail roof leaks, failed water heaters and appliance hoses, and storm runoff. The slab leak page covers the soil side, and the local risk profile covers the rest.
Does homeowners coverage apply?
Insurers generally pay for sudden, accidental water such as a split supply pipe once the deductible is met, while water rising from a stream or street is a flood policy matter. Policies differ, so check with your own insurer.
How many days does drying take in Hurst?
A clean-water loss confined to a room or two commonly needs three to five days of equipment. A slab or wood floor that stayed wet longer runs past that, since meter readings, not the calendar, release the equipment.
What does IICRC S500 mean for my house?
It is the written industry standard behind professional drying. It defines the three water categories, uses a loss class to size equipment, and defines dry as meter readings within 2 to 4 points of an unaffected reference room.
Does a rental unit in Hurst follow the same steps?
Yes, with one extra concern. A leak in an apartment can reach units on either side, so the dry-out covers shared walls too, and owner and tenant should each hold a copy of the drying log.
Who runs water and sewer service in Hurst?
The City of Hurst Water Division runs water production and distribution, and the City of Hurst Wastewater Division operates the sewer collection system. A suspected problem in the city main goes to Public Works, while water on your floor is a restoration job.
Which parts of Hurst see stream flooding?
The city identifies six major watersheds, each with areas that can see stream or localized flooding, and FEMA maps the stream flood areas. Walker Branch in southern Hurst is a flash-flood concern. Surface water is Category 3 and usually a flood policy matter.
What changes when the water is sewage?
Sewage is Category 3 from the first moment, so anything porous it touched is removed rather than saved. The space is contained, HEPA scrubbers run, and an EPA-registered antimicrobial is applied before drying equipment starts.
What drives the price of a Hurst dry-out?
Four things: the water category, the area affected, the class of material and the days of drying the readings require. Run your own rooms through the water damage cost calculator for a planning range.
Water spreading through a Hurst home? Call now.
The crew answers day or night, maps the wet areas, pumps out the water and dries to the IICRC S500 standard.
Call (888) 527-9134 for Hurst water removal